I. Introduction and characteristics suitable for medium-sized motor ,, stand flat wire wound around the flat. Built-in variable speed system, Winder pull weight> 400kg, stepless adjustable speed 0-50 r / min, the shuttle pulled coil perimeter around 2-3m, motor power 2.2KW ,, single row of chain drive, the other can be Simple line planes equipped with brakes up tight. Product Features: Henan Mechanical and Electrical Equipment Co., Ltd. The new winding machine has the following characteristics: 1, simple structure, easy to operate, foot switch control, desktop operation. 2, in the design, winding angle of the disk drive speed through rigorous calculation, you can ensure flat copper wire when used without further adjustment, as long as the flat copper wire coil fixed to a specified location, the start switch to automatic winding . Second, the scope and technical parameters applicable scope: suitable for medium-sized motor ,, stand flat wire wound around the flat. Built-in automation control system, Winder pull weight> 400kg, stepless adjustable speed 0-50 r / min, the shuttle pulled coil perimeter around 2-3m, technical parameters: Model: QXRXJ Dimensions: 1550x650x850 MM Equipped with power: 2.2KW -6 speed motor winding disc diameter: Φ 500MM winding spindle back: 1300MM motor speed: 940 rev / min winding speed: 0-50 turn Weight: 150KG control mode: Inverter Brake way: Electromagnetic mechanical brake three, equipment maintenance and overhaul 1. During use of this product should be kept clean, clean, avoid dust contamination; 2. This product moving parts, gear and other periodic refueling should avoid being worn. Fourth, the safety instructions 1. The product is AC 380V, frequency: 50HZ; 2. avoid rain, away from flammable, explosive and corrosive chemicals; 3. This product is the frequent opening and closing of the product, its use should pay attention moving parts, to avoid being pinched or abrasions; 4. long-term use, the machine should be cut off the power supply.